|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
S/MOD/SKLDx10006/A/03/02/2003 page 1 / 2 F/GB SKLDx1006 Relais Statique DC pour circuit imprime DC Solid State Relay for printed circuit boards 10A - 60VDC * Gamme pour circuit imprime. * Technologie MOSFET. * Transil de protection en tension sur la sortie * Range for printed circuit board. * MOSFET output technology for high switching capabilities. * Output voltage protection on the output by transil output (*) Hot surface : 37,6 Hot surface : 17,5 0,3 4 3 2 1 1,5 x 1,5 (*) Modeles plus haute tension en preparation : nous consulter Higher voltage output pending : consult us Possibilite de montage sur adaptateur DIN : XKLD Possibility of DIN rail mounting : XKLD Application typique/Typical application 24,5 4 7,83 O1 5,08 12,7 10,16 43,6 0,55 7,6 + 1+ 7,83 1,70,15 6,3 21,7 0,15 Top view Trou / Hole O 1,6 2,54 Tolerances : 0,2mm Charge / Load (*) Applications: * Feux routiers ou ferrovieres * Moteurs, voyants, chauffage * Equipements de mesure ..... Typical applications: * Railroad, traffic signals * Motors, lamps, heaters * Measurement instruments ..... 3+ Rc Uc 1+ Ic - 4- 2- (*)Sur charges inductives./ On inductive loads = Diode de roue libre / Suppressed diode Caracteristiques de commande (a 20C) / Control characteristics (at 20C) DC Reference Symbol DC SKLD1xxxx Min 3 7 Nom 5 14 270 2500 2500 2500 Max 10 32 1 SKLD3xxxx Min 7 6 Nom 12 / 24 11 / 23 1000 Max 30 29 1 Unit V mA V V VRMS VRMS Parametres / Parameters Symbol Tension de commande / Control voltage Uc Courant de commande / Control current (@ Uc nom ) Ic Tension de relachement/Release voltage Uc off Resistance interne / Input internal resistor fig.1 Rc Caracteristiques d'entree-sortie (a 20C) / Input-output characteristics (at 20C) Tension assignee Isolement/Rated impulse voltage Uimp Isolement entree-sortie / Input-output isolation U Isolement E-S/semelle/ I-O/ case insulation U Caracteristiques generales / General characteristics Parametres / Parameters Poids/Weight Temperature de stockage / Storage temperature Temperature de fonctionnement / Operating temperature Conditions Symbol Typ. 15 -40/+120 -40/+80 Unit g C C celduc All technical characteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. r e l a i s S/MOD/SKLDx10006/A/03/02/2003 page 2 / 2 F/GB Caracteristiques de sortie (a 20) / Output characteristics(20C) Parametre / Parameter Tension nominale / Nominal voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Tension d'ecretage par Transil / Clamping voltage by transil Energie maximale de transil / Maximum energy for Transil Puissance maximum sur transil / Max power for Transil Courant nominal (voir les caracteristiques thermiques) / Nominal current (see thermal curves) Courant de surcharge accidentel admissible maximum / Maximum accidental overload current Resistance a l'etat passant / On state resistance (Rds-ON ) : maximum value Resistance a l'etat passant / On state resistance (Rds-ON ) : typical value Chute tension directe (In) / On state voltage drop (IN) Courant de fuite etat bloque / Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture / Turn on time Temps d'ouverture / Turn off time Frequence d'utilisation / Operating frequency SKLDx1006 12-24VDC 7 a/to36 60 40V@1mA 58,1V @ 10,3A 600W 1ms (1,2/50s) 0,5 W 10 100A 10ms 20 mohms 16 mohms 0,2 0,1 0,1 10 150 (**) Unit VDC VDC VPEAK V V W W A APEAK m m VDC mA mA s s Hz Fig.2 Caracteristiques thermiques / thermal curves : SKLDx1006 12 11 10 9 Load current (A) 8 7 6 5 4 3 2 1 0 0 10 20 30 40 50 60 Ambient temperature (C) 70 80 (**) : Une frequence de commutation rapide va entrainer un echauffement supplementaire du MOSFET de sortie. De meme l'energie emmagasinee dans la protection transil a chaque commutation OFF doit etre verifiee. Pour des frequences < 1hz l'influence devient negligeable. Pour des frequences de commutation > 1hz, il peut etre necessaire de diminuer le courant nominal. Pour plus d'infos consulter notre service technique. High frequency commutations will increase the MOSFET temperature. At each OFF commutation, energy inside the transil voltage protection must be checked. For frequencies < 1hz, there is generally no influence. For frequencies > 1hz, it can be necessary to reduce the current. For more informations, please contact our technical department. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SKLD31006 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |